- RTF BLADE Chroma ST-10+
- wheelbase: 400mm
- FC BLADE (ARM-CORTEX M4 based, GPS
- plastic, 325 x 325 x 242mm (L x W x H), 1.300g
Author: Jan Holthusen
JeansQuad
- DIY DJI Flame Wheel (frame similar)
- wheelbase: 500mm
- CC3D FC, 4 motors
- RX: FrSKY X4R PPM
- plastic, 590x590x130 (L x W x H), 950g
TriRaven
- DIY-kit HJ-Y3 Tricopter
- wheelbase: 300mm
- glass carbon fiber, 560x800x140 (L x W x H), 750g
RostHopper XL
- DIY-kit: CCC cut plywood parts 3mm
- wheelbase: 625mm
- FC: KK 2.1.5, RX 5 channels PWM, 4 motors
- wood, 439 x 439 x 85mm (L x W x H), 800g
CHAMELEON
- RTF BLADE inductrix 200
- wheelbase: 200mm
- FC: E-Flite -Blade 3-in-1 (BLH9012)
- plastic, 155x155x45mm (L x W x H), 185g
PhantomBear
- RTF DJI Phantom 1.2
- wheelbase: 350mm
- FC: DJI NAZA V2, GPS
- camera, 5,8GHz TX, cloverleaf arial
- 520x520x230mm (L x W x H), 1100g
GhostLE
- DIY with LEGO technic
- wheelbase: 400mm
- FC: EMAX Skyline 32 (Naze32 compatibel)
- 4 motors EMAX XA 2212/820KV
- 530x530x165mm (L x W x H), 950g
maker faires – extra-terrestrial sites
If the ideas of Ridley Scott live on in the design of objects, it is surely in the flying mods exhibited at the Maker Faires of Frankfurt and Berlin by Jan Holthusen’s post-technology multicopter meditations. He has created visually extraordinarily exciting objects, composed simply of multicopter frames (“ReadyToFly”, “DIY kits” or “self-designed”) and artisticly fascinating…
StrassCopter
- RTF RC EYE One Xtreme, also called EOX
- wheelbase: 225mm
- flight control board v32
- plastic, 185 x 185 x 80mm (L x W x H), 157g
Tarot140
- RTF TAROT TL140H1
- wheelbase: 140mm
- FC Naze32 clone, 4 motors
- 233 x 233 x 165mm (L x W x H), 160g
LegoBee
- DIY with LEGO technic
- wheelbase: 140mm
- FC by walkera, 4 motors
- 20 x 18 x 12mm (L x W x H), 45g
MECOPTERA
- DIY ZMR250 frame
- wheelbase: 250mm
- FC: PixRacer with PX4, 4 motors EMAX RS2205 2300kv
- RX: FrSKY X4R via SBus
- 200 x 240 x 180mm (L x W x H), 950g
flyingmods.com 